
complete list of problems, questions, and topics that architects might face after joining platform.
One of the most important aspects of working as an architect on BDesigner is understanding how your payment is calculated per project.
Whether you're handling a 2D floor plan, 3D elevation, structural drawings, or complete service packages — your earning depends on several transparent factors like service type, project complexity, rating, and punctuality.
This guide explains the full payment logic, deduction rules, and bonus structure so you always know what to expect after every project.
Each architectural service offered on the BDesigner platform has a predefined base rate based on:
Service type (e.g., 2D Floor Plan, 3D Elevation, Estimate, Structural, Electrical, Plumbing)
Plot size (e.g., 20x30, 30x40, 40x60, custom sizes)
Building type (Ground floor, G+1 to G+5)
Design complexity (standard, moderate, or premium)
Example:
A 2D Floor Plan for a 30x40 G+1 residential house may have a base service value of ₹1500 – ₹2500.
This base is what the client pays, and from this, the architect's payout is derived.
BDesigner applies a fixed payout percentage to determine how much of the project fee is paid to you.
High-rated architects with good track records may receive higher percentages for bonus projects.
Example:
If the client paid ₹2000 for a project:
You earn 60% = ₹1200 (before any deductions)
To maintain quality and discipline, we apply transparent deduction rules in case of:
| Condition | Deduction Type |
|---|---|
| Low Rating (below 3.5 stars) | ₹100 to ₹300 per project |
| Delay in submission (beyond allowed buffer time) | ₹100 to ₹500 depending on delay length |
| Multiple revisions caused by ignoring initial requirements | ₹100 per avoidable revision |
| Incomplete file submissions | Up to ₹300 deduction or rework without extra pay |
Note: Deductions are clearly mentioned in your payment report and can be avoided with consistent quality work.
Once the project is reviewed by the consultant and all files are approved:
Your final payment (after deductions) is added to your “Earnings” tab
Payment status is shown as:
Approved (eligible for payout)
Under Review (consultant reviewing your submission)
On Hold (pending corrections or client response)
BDesigner follows a weekly or bi-weekly payout cycle (based on your region and bank settings).
You can view your payment cycle and pending balance in the Architect Panel
Payments are transferred directly to your registered bank account
You’ll get a payout report with tax/TDS details
We reward consistent performers with:
| Performance Level | Bonus/Reward |
|---|---|
| 4.7+ Avg Rating (10+ projects) | Up to ₹500 bonus/month |
| 100% On-Time Submissions | Eligibility for priority projects |
| 4.9+ Avg + No Deductions | Invitation to Premium Architect Group |
Let’s break it down with a real-world example:
| Detail | Amount |
|---|---|
| Client paid for 3D Elevation | ₹2500 |
| Architect share (60%) | ₹1500 |
| Deduction (Late delivery ₹200) | -₹200 |
| Final Payout | ₹1300 |
You’ll see this breakdown in your “Payout Report” tab.
| Component | Description |
|---|---|
| Base Project Value | Set by service type and complexity |
| Architect Payout % | 60–70% depending on profile |
| Deductions | Based on rating, delays, errors |
| Payment Cycle | Weekly/Bi-weekly payout to bank |
| Bonuses | Based on quality, ratings, and punctuality |
At BDesigner, we believe in fair, transparent, and performance-based earnings for every architect. Your income grows as your ratings, punctuality, and professionalism improve.
Work smart, deliver quality, and let your portfolio speak for itself — your earnings will naturally increase.
For payment-related queries or payout delays, contact:
👉 support@bdesigner.in
— Team BDesigner
Designed to empower architects, project by project.
For architects working on the BDesigner platform, timely and transparent payments are a top priority. Once a project is successfully completed, the payment process follows a secure and structured flow. Below is a step-by-step explanation of when and how your payment will be released.
Once you’ve completed and submitted all required files for a service (e.g., floor plan, elevation, plumbing, structural, etc.), the project status will be marked as Completed in the app by the consultant after verifying the final output.
Ensure you upload all versions (v1, v2, final) correctly.
Confirm that you’ve responded to any last-minute client feedback.
Consultant does the final technical check before closure.
After the consultant marks the project as completed, the BDesigner system initiates a 3 to 5 working days processing window.
This time is required for:
Final backend checks
Internal approval of architect payout
Processing of TDS (if applicable)
Bank transaction formalities
Note: Working days exclude Sundays and national holidays.
Once the processing is complete, your payment is released directly to your registered bank account linked to your architect profile.
You will receive an in-app notification and an email confirming the release.
You can also track the payment release in the “Earnings” section of your architect dashboard.
Unresolved feedback or pending revision updates may delay project closure, which in turn delays payment.
Keep your bank details and PAN card information updated in your profile for smooth processing.
Architects working under split-payment projects will receive payment in two halves:
First half: After client’s first payment & v1 file delivery.
Second half: After full file delivery and client’s second installment.
Use the “Project History” and “Earnings Overview” tabs in your dashboard to track:
Project name
Payment value
Status (Pending / Released)
Date of release
This helps with transparency and future financial planning.
If payment is delayed beyond 5 working days, or if you notice any discrepancies, you can:
Contact the Support Team via the in-app chat.
Or email us at: support@bdesigner.in with your Project ID and issue details.
Maintaining high ratings, clear communication, and timely delivery ensures quicker approvals and faster payments. Always aim for 4+ star ratings to avoid delays and penalties.
As an architect on the BDesigner platform, it's important to track your income transparently — whether it’s pending, processed, or released. That’s why we’ve designed a dedicated Billing Section that gives you a clear, project-wise breakdown of all your payments.
Here’s a complete step-by-step guide on how to view your completed and pending payments directly from your architect dashboard.
Start by logging into your BDesigner Architect Web Panel using your registered email and password.
Make sure your profile is verified to access all billing and payout sections.
Once logged in:
On the left-hand side menu, click on “Billing”.
This section is your one-stop destination for everything related to your earnings.
Inside the Billing Section, you'll see two main tabs:
Completed Payments
Projects that have been fully completed and cleared.
Payment status: Released
Includes past earnings, order summary, invoice, and transaction date.
Pending Payments
Projects that are yet to be closed or are in the verification stage.
Payment status: Under Review or Processing
Helps you track upcoming payouts.
Each payment entry includes the following information:
| Field | Description |
|---|---|
| Order ID | Unique ID for your project |
| Service Type | e.g. Floor Plan, 3D Elevation, Plumbing, etc. |
| Order Value | Total value of the architect’s payout |
| Payment Status | Released / Under Review / Processing |
| Invoice Download | Option to download tax invoice and transaction proof |
| Date | Payment or submission date |
For every completed payment, you can:
Click on “Download Invoice”
Get a PDF with:
Project details
Architect payout amount
TDS (if applicable)
Final transfer date
Keep these for tax filing or personal records.
To make it easier to navigate:
Use filters to view:
Payments by month
Specific services
Project status
Search by Order ID or Client Name
This makes managing your finances and tracking performance easier.
At the top of the billing page, you'll also find a summary panel:
Total Earnings
Pending Payments
Completed Payments
Projects in Review
This gives you a quick overview of your current financial standing with BDesigner.
Payments are generally released within 3–5 working days after project completion and consultant verification.
In case of delays, contact support with your Order ID.
Always maintain a 4+ star rating for smooth and quick payment processing.
If you're facing issues accessing your billing section or invoice:
📩 Contact the Support Team from your panel.
📧 Or email: support@bdesigner.in with your query and Order ID.
With this transparent and detailed system, BDesigner ensures that your earnings are always just a few clicks away. Stay updated. Stay informed. 💼
“From Idea to Execution — We’ve Got You Covered.”
info@bdesigner.online
+91-9209914810
Copyright © 2025 Banashankari Designer Visualisation Pvt. Ltd. All rights reserved.